Tradeweld Acrylic VT is a two part methacrylate structural adhesive, which is fast setting when mixed via a static mix nozzle at room temperatures. Because it is a high viscosity non-sagging material, the mixed material is ideal for all types of gap filling requirements on composites, metals and thermoplastics. It is also very good on vertical surface bonds, exhibiting excellent structural strength even without priming the surfaces.
Tradeweld Acrylic VT will form strong bonds most substrates, including but not limited to ABS, Acrylic, Aluminium, Brickwork, Ceramic, Coated Metals, Concrete, Fibreglass, FRP, PVC, Steel, Thermoformed Plastics, Vinyl, Wood.
Because of its macro structure the bonds show excellent durability, high peel strength (even in big gaps) and excellent solvent and environmental resistance. The cured adhesive has been tested and approved for use with ovens for powder coating and paint bake cycles up to 220°C.
Typical uses and applications of Tradeweld Acrylic VT
Structural joining of metals and plastics.
Composite bonding on ceramics where a high impact strength is required.
Wind turbines.
Sports goods.
Venting / ducting.
Prop and Model making.
Bonding magnets.
Sign Making.
Vehicle building and repairs including automotive spoilers.
Applications subject to outdoor weathering or solvent exposure.
Limitations
Tradeweld Acrylic VT is not recommended on Mirror Finish Stainless Steel.
Technical Datasheet
Safety Datasheet
NOTE: This product requires a 50ml Mixer Gun or
400ml Mixer Gun for use.
Additional nozzles for 50ml
Additional 2-hole nozzles for 400ml
This product was added to our catalog on Thursday 28 February, 2008.
