Tensorgrip L22 is a non-MECL (does not contain methylene chloride) fine spray adhesive for permanent bonding of materials where immediate bond strength, water resistance and high heat resistance are required. It is suitable for bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. Tensorgrip L22 can also be used for bonding sheet metals where surface preparation is very important – surface must be degreased and lightly abraded with fine abrasive or non-woven material.
Fast Drying - 2-3 minutes flash off
Open time up to 30 minutes
Good Heat Resistance
High Solids
Portable System
Non-chlorinated Adhesive
Easy Application Control
Gun & Hose Set
Kick Off Kit 6 - Web Spray
LIMITATIONS
NOT RECOMMENDED for use with plasticised vinyls, flexible plastics, expanded/extruded polystyrene, PE or PP.
Technical Datasheet
Safety Datasheet
Need help selecting the right Tensorgrip product?This product was added to our catalog on Tuesday 20 July, 2021.
