THIS PRODUCT IS NOW ONLY AVAILABLE IN 600ML FOILS.
Alternative cartridge based products...
For construction / building use including hygienic cladding and bonding metal splashbacks we recommend using HB5 adhesive.
For vehicular use with pointing on caravans and motorhomes we recommend using Tradeseal MS60.
If the sealant needs to be over-painted then we suggest a polyurethane sealant such as Tradeseal PU40FC.
Tradeseal HB40 is a one part, solvent free hybrid sealant and adhesive. It has been designed for bonding and sealing most common substrates. Tradeseal HB40 finds many uses in the building industry, vehicle building and repair, marine, caravan and motor home building and repair, etc.
Benefits
Very high initial grab, with no slip and good gap filling properties.
High green and final bonding strength
Interior and exterior use, and can even be applied to wet surfaces
Totally Waterproof & Weatherproof
Quick Curing.
Overpaintable (test with required paint prior to use)
Powerful fungicide prevents mould growth
Safe in use - Free from solvents, acids, and isocyanates.
Good temperature resistance from -40°C to +100°C
Excellent primerless adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, Perspex, glass, wood, enamel, painted surfaces etc
HB40 is commonly used for bonding splashbacks (metal sheets), for this application we recommend 'snaking' the adhesive on the metal sheet and affixing it into position. Then allow at least 24 hours for the adhesive to cure before sealing around the edges of the splashback. HB40 can be used for both sealing and bonding and comes with a capped nozzle.
Technical Datasheet
Safety Datasheet
This product was added to our catalog on Thursday 28 November, 2013.
