Condabond is a methylmethacrylate adhesive based plastic repair compound and structural bonder. The powerful methacrylate adhesive can be used for structural bonding of many plastics, composites, metals, ceramics and many other substrates in sign making, vehicle building and repair, and general fabrication; and it's resistance to impact makes it ideal for bonding magnets.
Condabond is a two part 'A&B' component system which, when mixed via a static mixer nozzle, cures to a solid material but remains soft enough that it can be filed or sanded down, and is over-paintable.
The product is supplied in a 25ml hand held syringe that does not require an applicator gun for use. A 2-hole mixer nozzle is supplied with each syringe. Additional 2-hole nozzles are also available.
For repairing cracks in plastics in caravan and motorhome applications we recommend using Condabond White or Black.
Instructions for use.
1. Wipe the surface to be bonded with TGP Adhesion Promoter or an IPA based cleaner. Allow to flash off, then apply Condabond immediately to the prepared surface. For best results use on clean, dry substrates between +15°C and +20°C.
2. Remove the cartridge cap and level the pistons by dispensing a small amount of material, before attaching the mixing nozzle. Once the nozzle is attached, dispense a small amount until a uniform colour is evident. Then apply the mixed adhesive to the prepared substrate
When cured, Condabond can be sanded and finished in the same way as plastics.
(use primers* and paints usually used with plastics.)
The cartridge can be re-sealed if only partly used by removing the mixing nozzle, cleaning the two cartridge openings and replacing the cartridge cap.
This product was added to our catalog on Wednesday 11 November, 2020.
